Blog over de restauratie van mijn '50 Studebaker Commander

Back in Business

December 31st I had to vacate my workshop. The guys I rent it from moved to another place and I was lucky enough to be invited to move with them to a new hall. It is however quite a lot of work to move the mess I made during the last years.
One TR7, presently not driving, one donor car in pieces, definitely not driving and a Studebaker, mainly in boxes and plastic bags except for the bigger parts. All in all a truckload of pieces, workbenches, storage racks and tools. The first three weeks of December I spend packing and preparing the new place. 




It has the same floor area (65 square meters, 700 Sq ft) but It is high enough to build a second floor of about 40 sq meters. Not high, on most of it I can’t stand, but a huge improvement over the old shop. All the parts and the less used tools are out of the way. The last week of 2011 I moved all my stuff. I also bought an old car lift from THF in Hoek van Holland, and repaired and installed it. Today I finished all of that. The chassis is on the car lift, the body and the parts are stored in the attic.

So here it is: Clean, roomy, light. Time to get to work.

Advertenties

2 Reacties

  1. Tjeerd

    Really impressed! Glad you’ve posted a new message again! Great place to do your resto job! Keep up the good work. We’ll meet you in Hillegon upcoming sunday! TJ.

    19 januari 2012 om 10:32

  2. Marianne

    Prachtige nieuwe ruimte, Kees!
    En wat een auto!! Die details zoals de lichten, front enz. Echt een beauty.
    Laat me weten wanneer ie klaar is, kom ik hem/haar bewonderen.

    20 januari 2012 om 13:47

Geef een reactie

Vul je gegevens in of klik op een icoon om in te loggen.

WordPress.com logo

Je reageert onder je WordPress.com account. Log uit /  Bijwerken )

Google+ photo

Je reageert onder je Google+ account. Log uit /  Bijwerken )

Twitter-afbeelding

Je reageert onder je Twitter account. Log uit /  Bijwerken )

Facebook foto

Je reageert onder je Facebook account. Log uit /  Bijwerken )

Verbinden met %s